Compliance with established standards is mandatory for GRP water tank design and documentation. The most widely adopted standards include:
Create dedicated layers for the tank body, structural supports (skids), internal reinforcement, piping connections, and annotations. Step 3: Geometric Modeling: grp water tank autocad drawing
: Detail the internal tie-rods (often stainless steel) or external galvanized steel reinforcements. Access & Safety : Include a Compliance with established standards is mandatory for GRP
Draw a C-Channel (150x75mm). The GRP panel sits inside the web of the channel. Add anchor bolts (M12 @ 500mm ctrs) fixing the base to the concrete plinth. Access & Safety : Include a Draw a C-Channel (150x75mm)
The pressure increases at the bottom of the tank. Panels at the base are usually thicker or require more reinforcement than those at the top. The CAD drawing must clearly distinguish panel thicknesses (e.g., 6mm, 8mm, 10mm, etc.). Waterproofing and Sealing
Steel tanks rely on the water to brace the walls. GRP relies on stays. If you draw a GRP tank with stays only at the water line, it is wrong. Stays must be distributed vertically (top, middle, bottom) to handle pressure during filling and earthquake sloshing.