Toshiba Aw-j800am User Manual ((better))
Position the drain hose at a height lower than 100 cm from the floor to ensure proper gravity draining. Do not submerge the end of the hose in water. Levelling the Unit
Yes. The user manual lists it as 3-star or 4-star BEE rating (depending on your region). Use the “Quick” cycle for small loads and the “Normal” cycle with full loads to save water and power.
An intuitive combination of water flows (No Wrap, Upper Push, and Gush flows) and an s-type paddle designed to remove stubborn stains while protecting fabric.
Run a "Tub Clean" cycle periodically to remove detergent buildup. toshiba aw-j800am user manual
A low-speed, gentle agitation cycle meant for silks, laces, and hand-wash-only garments.
If you would like to troubleshoot a specific issue, let me know what or malfunction symptoms your machine is showing so I can provide the exact fix. Share public link
Turns the machine on or off. The machine auto-shuts off after a period of inactivity to save energy. Position the drain hose at a height lower
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Water inlet failure (no water or low pressure) | Check if tap is off, hose is kinked, or inlet filter is blocked. | | E2 | Lid open during spin cycle | Close the lid firmly. The machine will not spin with the lid open. | | E3 | Drain error (water not emptying) | Check drain hose for clogs. Clean the pump filter (if accessible). | | E4 | Unbalanced load | Rearrange clothes manually to distribute weight. | | E5 | Over-sudsing / too much detergent | Run a rinse cycle without detergent. Use less detergent next time. | | E9 | Motor or PCB fault | Unplug for 10 minutes. If persists, call Toshiba service. |
Ensure all four feet rest firmly on the ground to prevent spinning vibrations. Water Connection
The AW-J800AM features a user-friendly control panel. The exact layout may vary slightly, but the functions remain consistent. Here’s a typical washing course table as outlined in related manuals: The user manual lists it as 3-star or
Cause: The laundry load is unevenly distributed inside the drum during a spin cycle.
Press the Start/Pause button. The lid will lock automatically during high-speed spins. 5. Cleaning and Routine Maintenance
This often happens when washing a single, large, heavy item. The manual advises adding one or two more similar items to the wash load. This helps to balance the drum's weight and allows the spin cycle to proceed smoothly.