 | Loading... Please wait |
221V–300V (Default: 280V)
The Sinotimer SVP916 can be found at various online retailers specializing in electrical components and solar equipment. Key points to consider:
[Hold SET 3s] ──► A1 (Over-Volt) ──► A2 (Over-Volt Recovery) ──► A3 (Over-Volt Delay) │ │ │ A6 (Under-Volt Delay)◄── A5 (Under-Volt Rec)◄── A4 (Under-Volt) ◄───┘ │ └──► A7 (Over-Current) ──► A8 (Current Delay) ──► A9 (Power-On Delay) ──► [Save & Exit] Parameter Function Adjustable Range Factory Default Over-Voltage Protection Threshold 221V – 300V / OFF A2 Over-Voltage Recovery Voltage 220V – 299V A3 Over-Voltage Protection Action Time 0.1s – 10s A4 Under-Voltage Protection Threshold 150V – 219V / OFF A5 Under-Voltage Recovery Voltage 151V – 220V A6 Under-Voltage Protection Action Time 0.1s – 10s A7 Over-Current Protection Threshold 1A – Max Rated Current A8 Over-Current Protection Action Time 0.1s – 30s A9 Power-On Recovery Delay Time 2s – 512s Modifying and Saving Values Use ▲ or ▼ to change values within a code profile.
If you need to revert all settings to their original factory defaults:
Safeguards refrigerator compressors, washing machines, and air conditioners from low-voltage burnout. sinotimer svp916 manual version pdf full
For further details on advanced configurations or specific 3-phase models, you can refer to additional documentation on Scribd .
To configure settings, the device uses a simple button interface. Setting Step Parameter Description Default Value Adjustable Range Over-voltage Protection Value 221V – 300V – OFF P02 Over-voltage Recovery Value 220V – 299V P04 Under-voltage Protection Value 150V – 219V – OFF P05 Under-voltage Recovery Value 151V – 220V P09 Over-current Protection Value 63A (model dependent) 1A – 63A/80A P10 Recovery Delay Time 2s – 512s How to adjust settings:
: Adjustable value and recovery time.
Action : Set the safe voltage level required for power restoration. Range : 150V - 219V (or OFF) Action : Set the minimum voltage threshold. Under-voltage Recovery Value (U4) Range : 151V - 220V 221V–300V (Default: 280V) The Sinotimer SVP916 can be
Sinotimer SVP-916 is an intelligent, adjustable over-voltage, under-voltage, and over-current protector designed for single-phase 230V AC systems. You can download the full PDF version of the manual from or view the official documentation hosted on Key Specifications Rated Voltage: AC 230V, 50/60Hz. Max Current: Up to 63A (models available in 40A and 80A). Protection Types: Over-voltage, under-voltage, and over-current.
The voltage is likely fluctuating outside the set range. Consider increasing the delay times slightly if the surges are very short.
What is the total printed on your device casing (40A or 63A)?
The official "SINOTIMER SVP-916 Instruction Manual" is a relatively short document, only 2 pages long. It is best obtained directly from the manufacturer's official documentation repositories. The most reliable source is , which hosts a complete PDF version that you can download. For further details on advanced configurations or specific
"Sinotimer SVP916 user manual filetype:pdf"
Are you setting this up for a or an industrial application ? Share public link
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.