Woodwop 5.0 Tutorial -

Standard system 32 dictates a 32mm pitch between holes. Number (N): Total count of holes in the row.

Select the : Choose which edge to drill into (Front, Back, Left, or Right).

: The distance into the material. Use negative values if referencing from the top surface, or absolute positive values depending on your system configuration. woodwop 5.0 tutorial

: WoodWOP 5.0 supports up to 90 variables, but some configurations have a lower default limit. The maximum can be increased through system configuration changes, though this requires deeper knowledge of the software's internal settings.

Never run a program on the physical CNC machine without testing it digitally first. Standard system 32 dictates a 32mm pitch between holes

Located on the right-hand side, these icons represent the machining operations (drilling, routing, sawing). 2. Setting Up Your First Workpiece

To help tailor the next steps of your learning journey, let me know what specific tasks you are working on. If you are interested, I can: Provide a guide on into WoodWOP 5.0 : The distance into the material

Drilling is easy. Contour cutting is where WoodWOP 5.0 shines. To cut a shape, we use CONTOUR and CYCLE 23 (Pocket/Contour milling).

When you open WoodWOP 5.0, you are greeted with a split-screen layout. Let's label the four critical zones: