Bystronic Laser Error Code List Jun 2026

Non-critical faults that pause the current process but allow for an operator reset. Emergency Stops:

Manually check the axis rails for debris or metal shavings. Ensure the automatic lubrication system is functioning and filled with the correct oil grade. Limit Switch Interrupted

A faulty or contaminated sensor cable (coaxial cable running down the head).

Wrong gas ratios, empty gas cylinders, or a faulty mixing unit. bystronic laser error code list

– Usually related to the CNC control unit (ByVision/ByWare), programming issues, or incorrect parameter settings.

The following are common faults encountered in Bystronic laser environments, ranging from mechanical obstructions to sensor errors. 🔌 System & Drive Errors "Drives Not Ready": Often occurs after a head collision or an E-stop. Try a from the administrator menu. W-Axis Frequency Error:

Inspect Consumables: Many process errors are simply caused by a dirty lens, a worn nozzle, or a contaminated ceramic ring. When to Call a Technician Non-critical faults that pause the current process but

Many drive-related error codes disappear once the automatic lubrication system is refilled and the rails are wiped clean. When to Call Technical Support

The chiller compressor is failing, or the ambient room temperature is too high for the chiller to compensate.

"It just stopped," said the night shift supervisor, pacing behind Elias. "No warning, no noise. Just stopped. We have a truck leaving at 6:00 AM with three tons of automotive brackets. If we don’t restart..." Limit Switch Interrupted A faulty or contaminated sensor

Look for line kinks or audible leaks behind the machine cabinet. Perform a gas purging cycle through the operator terminal. 4. Drive System & Motion Errors (1000–3000 Series)

), most daily operational issues fall into a few primary categories. 🛠️ Common Error Categories

Bystronic systems divide errors into distinct categories based on the affected component. Identifying the prefix or nature of the code helps isolate the issue immediately.