Audinate - Dante Virtual Sound Card - Dvs-4.4.1.3 Standalone 'link' -
The version represents a stable, high-performance iteration of this software, transforming any standard PC or Mac into a fully functional Dante-enabled device without the need for specialized hardware interfaces. What is Audinate Dante Virtual Sound Card (DVS)?
Once installed, DVS presents itself to your system exactly like a hardware ASIO (Windows) or Core Audio (macOS) interface. This allows you to route up to 64x64 channels of uncompressed, bidirectional audio over a standard Local Area Network (LAN). Breakdown of Version 4.4.1.3 STANDALONE
: Operates over a standard 1 Gbps wired Ethernet network connection . Wireless network cards (Wi-Fi) are not supported due to latency and packet delivery constraints. Architecture of DVS 4.4.1.3 Standalone
The is an indispensable tool for modern audio professionals. By marrying the simplicity of software with the power of Dante AoIP networking, it provides a flexible, high-channel-count solution for recording, playback, and routing. Whether you are in a studio, at a live venue, or managing a corporate AV installation, DVS-4.4.1.3 delivers reliable performance without the need for additional hardware. Audinate - Dante Virtual Sound Card - DVS-4.4.1.3 STANDALONE
If you are on an older version (e.g., 4.1.x or 4.2.x), the upgrade to is free for existing DVS license holders. New users can purchase a perpetual license from Audinate or authorized resellers for approximately $49.95 USD, or start a 30-day fully functional trial.
Dante Virtual Soundcard is a software application that installs directly on your computer, allowing it to act as a native Dante audio interface. It uses the existing Ethernet port (or Gigabit NIC) of a PC or Mac to send and receive up to 64 channels of uncompressed, low-latency audio to any Dante-enabled device on the network.
Engineers can connect a laptop to a Dante network at a venue, recording 64 channels of high-resolution audio via a DAW, while simultaneously sending backing tracks back to the console. This allows you to route up to 64x64
In Dante Controller's Routing tab, simply click cross-points to patch DVS transmit channels to your console’s input channels, or vice versa. Once saved, you can close Dante Controller—the routing remains active because of the standalone nature of v4.4.1.3.
But if you are archiving a system, if you are setting up a remote recording rig in the desert where the internet is a rumor, or if you are restoring a studio that was perfectly stable until “someone updated the driver last Tuesday”... find the 4.4.1.3 Standalone installer.
Version 4.4.1.3 Standalone is a crucial software asset for audio engineers, broadcasters, and studio producers. It transforms your computer's standard Ethernet port into a high-performance Dante network interface without requiring dedicated hardware. What is Dante Virtual Soundcard? Architecture of DVS 4
depending on network traffic and computer buffer settings, making it more suitable for recording and playback than ultra-low-latency monitoring. www.getdante.com or assistance with the installation process on your operating system? Dante Virtual Soundcard
You plug an Ethernet cable directly from a PC running DVS to another PC running DVS and expect it to work reliably in large channel count scenarios. A Gigabit network switch must be used to manage the multicast traffic and clock synchronization effectively. As one expert review stated, "Es MUSS ein Gigabit-Switch dazwischen sein!" (There MUST be a Gigabit switch in between!).
Dante Virtual Soundcard (DVS) version 4.4.1.3 turns computers into Dante-enabled devices, requiring installation, online activation, and configuration of audio interfaces (ASIO/WDM/Core Audio) and network settings. Proper setup requires a separate Dante hardware clock leader, configuration via the Control Panel, and routing in Dante Controller. For detailed setup instructions, visit Audinate getdante.com/products/software-essentials/dante-virtual-soundcard/. Getting Started with Dante Virtual Soundcard