Moeller Easy512-ac-rc Programming Manual

Go to the communication menu, select the correct COM port, and click Link .

: Users can create and edit circuit diagrams directly on the unit using the built-in LCD screen and four pushbuttons (DEL, ALT, ESC, OK) along with a cursor disk .

: Programs are entered as circuit diagrams (Ladder Logic) directly on the small LCD screen. moeller easy512-ac-rc programming manual

The cursor will flash on the first slot of the circuit diagram. Press OK to select an operand type (e.g., I , Q , M ).

Allows testing the program logic on the computer before loading it into the hardware. Go to the communication menu, select the correct

These detect "high" (ON) or "low" (OFF) signals from switches or sensors.

The "power" of the easy512 comes from built-in function blocks. The cursor will flash on the first slot

Used to delete a program or specific programming element.

Draw a horizontal line (the "wire") across to the right side of the screen. Select the output coil (e.g., ).

Press ESC to leave the edit mode and select "RUN" to start the program. 4. Using EasySoft Programming Software