Cisco 851710 Install !!install!! Jun 2026
The front-facing turns green, showing stable internal voltage levels.
rommon 1 > IP_ADDRESS=192.168.1.10 rommon 1 > GATEWAY=192.168.1.1 rommon 1 > TFTP_SERVER=192.168.1.100 rommon 1 > tftpdnld
: Align the front or rear rack-mount brackets to the sides of the chassis and secure them with the provided screws.
: Open your terminal emulator with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
Need more help? Leave a comment below or visit the Cisco Community forums for real-time assistance from CCIE engineers. cisco 851710 install
Ensure the terminal settings (9600 baud, 8 data bits, no parity, 1 stop bit) are correct and that you are using the correct console cable.
Check for any physical damage. If anything is damaged, contact Cisco technical support. 4. Hardware Installation (Rack Mounting)
Most 851710 modules have two X2-based 10GE ports (e.g., TenGigabitEthernet 5/1 and 5/2).
Position the device at the desired rack unit (RU) location. If installing alone, use a rack shelf or a second technician to support the weight. Align the bracket ears with the rack rails. Need more help
: Attach the chassis ground connection before powering on to prevent ESD damage.
Insert your network cables. Use certified Ethernet lines to bridge your Wide Area Network (WAN) interfaces to external modems, and local switches to internal Local Area Network (LAN) interfaces.
Verify that a grounded power outlet is available. Safety Guidelines: Disconnect power before working on the equipment.
A high-quality RJ-45-to-DB-9 console cable or a shielded USB Type-A-to-Type-B console cable. Check for any physical damage
Depending on your deployment environment (standard equipment rack, on a desk, or on a wall), follow the appropriate mounting procedure below.
Establishing out-of-band console access is vital when performing a core software upgrade or initial system provisioning. Hardware Installation Guide for Cisco 8400 Series Routers
Connect the console cable to the physical port labeled CONSOLE or MGMT . Connect the other end to your admin workstation.
: For detailed step-by-step guides, refer to the Cisco 1710 Hardware Installation Guide or the Cisco 8500 Series Software Configuration Guide .