Actia Psa Xs Evolution 9780z5 Driver Upd Portable (iPhone)

If your software requires a different version, select the matching .HEX firmware file within the Interface Checker tool and click to flash the device microcontroller over USB. Troubleshooting Common Driver Update Errors Error: "Device Not Recognized" or Continuous Disconnections

Because the diagnostic programs (such as Diagbox) run deep into the vehicle’s CAN bus systems, an outdated or corrupted driver can cause severe instability, leading to interrupted firmware updates on the VCI itself, or complete failure to detect the interface when plugged into the OBD-II port. Step-by-Step Guide: Downloading and Updating the Driver

Expand or look for an entry with a yellow warning triangle.

package. This should be installed separately to ensure the VCI Manager detects the device. Official Downloads

Diagbox is looking for a specific COM port or the PassThru driver is missing. Fix: Install the ACTIA PassThru driver component (often included in the driver pack). Then, in Diagbox, go to Configuration > VCI Selection and manually select “PSA XS Evolution.” actia psa xs evolution 9780z5 driver upd

Updating this device typically involves two distinct layers:

: Perform tasks like programming new keys, resetting service intervals, and even "telecoding"—changing hidden settings like enabling a newly installed CD changer or cruise control.

Look for an unknown device or a device listed under (it might have a yellow triangle). Right-click the device and select Update Driver . Choose Browse my computer for drivers .

Click . Click Have Disk... , then click Browse . If your software requires a different version, select

Once rebooted, use the Device Manager to manually "Browse my computer for drivers" and select the ACTIA folder. Troubleshooting Common Errors "Init KO" or "Device Not Detected"

as an administrator. This wizard installs the necessary USB Com Board Evolution drivers (UMDF) required for the laptop to recognize the hardware. PSA VCI Driver

If your device manager shows any of the following, you need the driver update:

The 9780.Z5 is the hardware interface (probe) designed by ACTIA. It connects the vehicle’s OBD2 port to a PC via USB. package

Here is the critical information regarding this device:

If Windows sees an "Unknown Device," the USB cable or the internal solder points on the 9780.Z5 unit may be faulty.

The interface is not just a simple cable. It acts as a sophisticated translator between your vehicle’s many on-board computers and your laptop. Key hardware features include:

If you are upgrading your Diagbox software to a higher version (e.g., from v7 to v9), you may need to flash the interface firmware to 9780z5.

Plug the ACTIA PSA XS Evolution interface into a (Avoid USB 3.0 ports, as blue ports can cause packet drops with older 9780.Z5 chipsets). Open Device Manager .