Hot — Tickling Submission

Cement Based Adhesive

Monneli Arredo Colla

Cementitious Adhesive for Natural & Artificial Stone

Uses
ARREDO COLLA is used as an adhesive for fixing internally and externally natural or artificial stone, on both walls and floors. It can be used also for fixing of the following:
All types of ceramic tiles
Vitreous mosaic
Klinker tiles
Porcelanized gres
Single-fired tiles and low porosity materials
Tiles on top of old ceramic floors, marble or natural stones
back to Tile Adhesives
Technical Information
Product Description

A powder grey adhesive for natural and artificial stone. It has a base of special binders combined with selected aggregates of a suitable granulometric size and special additives. ARREDO COLLA has a rapid setting and hydration time which prevent vertical slipping, it is a single component and therefore easy to apply by simply adding water.

Advantages
  • Fast-Setting
  • Vertical slip resistant
  • Easily workable
  • Water resistant
  • Eco-friendly
  • Formulated to suit Middle East condition
Compiliance Standard
  • European Directive UEATC
  • BS 5980 – 1980
  • DIN 18156 – 2nd part
  • ANSI A 118.4 – 1992
Packaging, Coverage / Consumption

Packaging:

ARREDO COLLA is supplied in 25kg bags.

Consumption: 

From 4 - 8 Kg / m² according to the type of support and stone.

Shelf Life & Storage

Storage:

Store in dry covered place in the original closed bags

Shelf life:

12 months if stored as recommended.

Colors
Grey or white
Technical Properties
PROPERTIES RESULTS
Appearance  Powder
Color  Grey or white
Density  1.7 kg/L
Flexural strength  6.5 N/mm2
Compressive strength  19 N / mm² 
Adhesion strength 1.8 N / mm²
Vertical sliding None
Water resistance Excellent
Aging resistance Excellent
Flexibility Very good
Open time at 25ºC 25 minutes
Grouting After 24 hours
Full strength After 15 days
Inflammability No
Service temperature From  -50C to +800C
All values are subject to 5-10 % tolerance

The goal is not to torture—it’s to ride the edge of overwhelm. Watch for the shift from playful laughter to frantic, breathless sounds. That’s the submission sweet spot. Hold it for a few seconds, then pause, let them recover, and start again. That “on‑off” cycle is what makes tickling submission so addictively hot.

The surrender of control can be a powerful psychological element, creating a sense of being completely overwhelmed by sensory input [1]. Essential Safety and Consent

The physical exertion and laughter associated with intense tickling can trigger a release of endorphins and dopamine. This can lead to a period of heightened relaxation and emotional calm following the activity.

Variety is key to keeping the sub guessing. Different tools create different sensations (known as knismesis - light tickling, and gargalesis - heavy tickling) [citation:5].

Have you experienced tickling submission? Share your thoughts (anonymously) in the comments below. And remember—whether you’re the tickler or the ticklee, play responsibly.

That’s the moment. That’s the click . Because they’re right. You can. You are. Your body is betraying you in the most intimate way possible—every muscle twitching, every nerve firing, your mouth open in a grin that’s half agony, half ecstasy—and you haven’t safeworded. You won’t. You’d rather shatter.

Remember the golden rules: . If you have those three things, there is no limit to the fun (and the laughter) you can share.

Because the physiological response to tickling is laughter, standard verbal cues can fail. A person who is tickled past their limit will often continue laughing even when they want the sensation to stop. This makes robust safety protocols mandatory. Non-Verbal Safe Words

: The laughter produced during intense tickling (gargalesis) is an involuntary reflex. This creates a paradox where the "victim" may be laughing even if the sensation is overwhelming or uncomfortable, a phenomenon explored in psychoanalytic essays like Adam Phillips' On Kissing, Tickling, and Being Bored . Tickling in Creative and Personal Contexts

The phrase "tickling submission" typically refers to a dynamic within the tickling fetish (knismolagnia) where one person takes a dominant role and the other a submissive one. While often portrayed in media as a playful or lighthearted activity, within this specific context, it is explored as a form of power exchange. The Psychology of Power Exchange

Additional Information
Health & Safety

ARREDO COLLA is a cement-based product. During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

If ingested, obtain medical attention immediately. Do not induce vomiting.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.32Mb)
OTHER PRODUCTS
More Products from this section
Monneli Adercol

Two Component Fast - Setting Cementitious Tile Adhesive

Monneli Elastokol

Synthetic Latex Additive for Tile Adhesive tickling submission hot

Monneli Maxicol

Polymer Modified Floor Tile Adhesive Up To 15 mm Thick Mortar The goal is not to torture—it’s to ride

Monneli Maxicol T50

THICK BED TILE ADHESIVE FOR INTERIOR & EXTERIOR USE Hold it for a few seconds, then pause,

Monneli Neofil F10

Adhesive & Grout for Glass, Ceramic Marble Mosaics

view more
RANDOM PRODUCT
Monneli Betopoxy 200

Low Viscosity Epoxy Injection Resin

Uses
BETOPOXY 200 is used for the following:
Structural restoring
Consolidating of damaged concrete for beams, pillars
Cement screeds cracks sealing
Vertical and oblique anchorage with high pull out resistance, etc.
Injecting into concrete and masonry cracks
To seal and bond cracks widths between 0.2 to 8 mm
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map