CPU overheating or CPU power connector unattached. Check that the 4-pin ATX 12V power supply lead is securely plugged into the top corner of the board and verify that fresh thermal paste is applied beneath the CPU cooler.

2 4 6 8 10 [ . . . . . ] (Empty Pin 10) [ . . . . . ] 1 3 5 7 9

Built on the chipset, this board is designed for 2nd Generation Intel processors. Specification Form Factor Micro-ATX (mATX) CPU Socket Compatible CPUs Intel 2nd Gen (Sandy Bridge) Core i7, i5, i3 (Max 95W) Memory Slots 4 x 240-pin DDR3 DIMM Max Memory 16GB (DDR3 1333 MHz, non-ECC) Expansion Slots 1x PCIe x16, 2x PCIe x1, 1x PCI Storage 1x SATA III (6.0 Gb/s), 4x SATA II (3.0 Gb/s) 2. Front Panel Header Pinout

It was used in systems like the Acer Veriton M4618G, M4610, and M4610G. Many owners pair it with Core i7-2600 processors and up to 32 GB of DDR3 memory.

If you’ve found yourself searching for the , you are likely in the middle of a PC repair or an upgrade project. Perhaps you are trying to identify a front panel connector, looking for the maximum RAM capacity, or hunting down a mysterious beep code.

Issue: The system turns on, fans spin, but there is no video output or display image.

Example: "The Acer Q65H2AM V11 is a [insert type of device, e.g., monitor, laptop, etc.]. This manual provides instructions for installing, operating, and troubleshooting the device. It is intended for users who want to get started with the device and understand its features and capabilities."

If your system fails to boot after a hardware change or bad BIOS setting, you must clear the Complementary Metal-Oxide-Semiconductor (CMOS) memory. Turn off the PC and unplug the power cable.

Connect the hard drive activity LED cable. Pin 1 is positive (+), Pin 3 is negative (-).

A: Locate the 2-pin header labeled CLRTC or CLR_CMOS near the CMOS battery. With the computer unplugged, move the jumper to pins 2-3 for 10 seconds, then return to 1-2.