Solution: Recalculate and re-program the P.02 value. Verify contactors are not welded shut.
Here are the standout technical specifications and key features:
Before opening the manual, you must understand what the device does. The Lovato 31 RGAM 12 is part of the RGAM series of automatic transfer switch controllers. Key specifications include:
⚠️ Without the exact wiring diagram from Lovato, do not guess terminal assignments. Incorrect wiring can cause short circuits or equipment damage. lovato 31 rgam 12 user manual
Lovato 31 RGAM 12 User Manual: Comprehensive Guide, Setup, and Troubleshooting
for PC connection, allowing for remote supervision, troubleshooting, and parameter programming via PC-RGAM software Setup and Configuration Initial Power-Up : Upon powering on, the controller defaults to Essential Programming : You must manually program the battery voltage in the BATTERY menu
The manual dedicates at least 10 pages to the programming sequence, accessed via the front panel’s four buttons (Menu, Up, Down, Enter). Solution: Recalculate and re-program the P
Standard operational state. The unit acts as a watchful supervisor, handling line voltage checking, crank timing, and interlocking contractor controls automatically.
If you need a specific version, look for the "31 RGAM 12" or "31 RGAM 12RC" documents, as these specify the 12VDC power supply and optional RS485 port.
The RGAM controllers have a standard, straightforward layout. The Lovato 31 RGAM 12 is part of
Built to satisfy IEC/EN 60255-6, EN 50081-2, and Italian Naval Register (RINA) testing standards. Core Operating Modes
When dealing with technical equipment like the Lovato 31 RGAM 12, understanding its purpose, installation, operation, and maintenance is crucial. Technical manuals like the one you mentioned are invaluable resources for users, providing detailed instructions and information necessary for the safe and effective use of the device.
IEC/EN 60255-6, EN 50081-1, EN 50082-2, and Italian Naval Register approved. 2. Front Panel Layout and Navigation
Supports single or three-phase systems spanning 70VAC to 624VAC line-to-line.
Front panel IP54 protection when properly gasketed, protecting against dust and water splashes. Rear terminal protection is rated at IP20.