Acer H81h3-am V1.0 Manual
There are two 4-pin fan headers available: CPU_FAN (located near the top edge close to the CPU socket) and SYS_FAN (system chassis fan connector located near the lower half of the board).
The is a micro-ATX (µATX) motherboard designed for 4th generation Intel Core (Haswell) processors. It is typically found in Acer pre-built desktop computers. This manual provides technical specifications, jumper settings, connector layouts, and troubleshooting steps.
Using a logic analyzer on the EC (ENE KB930QF, embedded controller), the sequence is:
For users seeking to upgrade, repair, or understand the technical aspects of this board, this comprehensive guide acts as an "Acer H81H3-AM V1.0 manual," covering everything from layout to BIOS settings. 1. Acer H81H3-AM V1.0 Motherboard Specifications Acer H81h3-am V1.0 Manual
Find the jumper block near the round, silver coin battery labeled CLR_CMOS or JBAT1 .
Typically located near the bottom right, usually color-coded for SATA 3.0 (6Gb/s).
2 x SATA III (6.0 Gb/s) ports, 2 x SATA II (3.0 Gb/s) ports There are two 4-pin fan headers available: CPU_FAN
1 x PCIe x16 Gen 3.0, 1 x PCIe x1, 2 x PCI slots (varies slightly by specific sub-variant)
Connect the Hard Drive LED cable. Pin 1 is Positive (+), Pin 3 is Negative (-).
2 x USB 2.0 internal headers (each supports 2 front panel ports). Acer H81H3-AM V1
This header allows you to connect the headphone and microphone jacks on your computer case. It follows the standard pin assignment. Do not force an old AC'97 cable onto this layout. Internal USB Headers (F_USB1 / F_USB2)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
1 x PCIe x16 Gen 2.0, 1 x PCIe x1, 2 x PCI Slots
Connecting the case cables to the front panel header is the most challenging part of setup without an official manual. Locate the header labeled (usually near the bottom-right corner of the board).
: 1 x 9-pin Front Panel Audio (F_AUDIO) header for standard headphone/microphone case jacks. Front Panel Header Pinout Diagram (F_PANEL) Front Panel Connectors Explained