Convo Inverter Cvf G3 Manual
Parameters are categorized by function groups (e.g., P0, P1, P2...). The standard format is Pxy where x is the group number and y is the parameter index.
| Terminal | Function | Description | | :--- | :--- | :--- | | L1, L2 (or R, S, T) | AC Input | Connect to commercial power supply (Single phase or 3-phase). | | U, V, W | AC Output | Connect to the 3-phase induction motor. Do NOT connect to power supply! | | P+, PB | Brake Resistor | Terminals for connecting an external brake resistor (if applicable). | | P+, P- | DC Bus | DC link terminals. | | PE | Ground | Earth ground terminal. Must be grounded according to local regulations. |
Proper installation requires secure connections to specific terminals: Input Terminals (R/L1, S/L2, T/L3): Main power supply connection. Output Terminals (U/T1, V/T2, W/T3): Connection to the motor. Control Terminals (X1-X6): Convo Inverter Cvf G3 Manual
I’d be happy to help you produce a (e.g., a product highlight, user manual section, troubleshooting guide, or marketing description) for the Convo Inverter CVF G3 Manual .
If you need to dig deeper into specific operations, let me know: Parameters are categorized by function groups (e
The Convo CVF-G3/P3 series is a new generation of high-performance frequency converters representing a significant leap forward in motor control technology. It was developed to meet the evolving needs of the global inverter industry, building upon the strengths of its predecessor, the CVF-G2/P2 series, while addressing its shortcomings. The series is commonly associated with both the Convo brand and Bosch Rexroth, reflecting a history of collaboration and technological excellence.
: Running command source (0: Panel, 1: External Terminal). | | U, V, W | AC Output
Fluctuations in incoming supply voltage, open phases, or degraded internal capacitors.
The CVF-G3 series supports a wide range of power requirements, typically ranging from for 3-phase 380V models. Input Voltage: 3-phase 380V ±15%, 50/60Hz. Output Frequency: Range of 0.10Hz to 650.00Hz.
Where you put the drive matters. Make sure your installation site meets these rules:
Verify that line voltage meets nominal product specifications and inspect primary input contactors. Overheat Status