Bonavita Sheffield Lifestyle Crib Instructions High Quality Now

If your baby chews on the wood rails during teething, consider installing a soft fabric crib rail cover to protect both the wood and your baby’s gums.

Never use standard hardware store screws or bolts if you lose the original pieces. Missing components must be replaced with original manufacturer-spec hardware to ensure structural integrity.

Use the shorter 1-3/4" Allen bolts to secure the four corner brackets of the mattress support to the metal tabs or holes located on the inside legs of the crib.

Locate the large and stand it upright with the finished side facing forward. bonavita sheffield lifestyle crib instructions

Used on structural bolts to prevent loosening over time due to crib vibrations.

For safety, the mattress support must be moved to its lowest position.

Before tightening any screws, prepare your workspace and inspect your parts to ensure a smooth, safe assembly process. Essential Tools Needed If your baby chews on the wood rails

Ensure the distance between the wood slats is no wider than 2-3/8 inches (about the width of a standard soda can). If a can fits between the slats, the crib is unsafe because a baby’s head could become trapped.

Position the crib away from windows, cords, drapes, blinds, heaters, and wall decorations that a child could pull down into the sleep environment.

Connect the Left and Right Side Panels to the Back Rail using the long Allen bolts ( Use the shorter 1-3/4" Allen bolts to secure

When your child reaches 35 inches in height or attempts to climb out of the crib, it is time to convert to a toddler bed.

Attach the front stationary rail to the side rails to complete the main frame of the crib. Ensure all wood grain finishes are facing outward. Step 3: Install the Mattress Support