Zk5kx Manual «Tested – REPORT»

| LED Color/Pattern | Meaning | |-------------------|---------| | Solid Green | Normal operation (output off) | | Blinking Green (1Hz) | Standby / waiting for input signal | | Solid Red | Output relay energized | | Blinking Red (fast) | Overload / short-circuit protection tripped | | Orange | Communication active (Modbus) |

| Parameter | Typical Value | | :--- | :--- | | Supply Voltage | 24V DC (±10%) or 110-240V AC | | Input Type | NPN/PNP (software-selectable) | | Output Type | Relay (2A) or Transistor (0.5A) | | Communication | RS-232, RS-485, Modbus RTU | | Operating Temp | -10°C to 55°C | | IP Rating | IP20 (panel mount) |

Never exceed the maximum switching voltage (e.g., 250V AC). Use an external fuse or circuit breaker rated at 125% of the full load current. zk5kx manual

: Press U/I again to exit, or allow the controller to sit completely idle for 10 seconds to auto-save and revert back to normal operation. Toggling Display Fields

: Automatically stops power delivery after a set number of Ampere-hours has passed (Adjustable up to 60Ah; disabled by default). Toggling Display Fields : Automatically stops power delivery

To edit these values, long-press the from the home screen. Short-press the SW button to step through the following parameters, and use the rotary encoder knob to adjust their limits:

: A programmable shutdown timer. Perfect for timing custom battery charging cycles up to 100 hours. Perfect for timing custom battery charging cycles up

According to standard instructions, the initial boot sequence should follow this order:

The is a highly versatile, programmable CNC power supply module designed for electronics hobbyists, engineers, and DIY builders. It functions as an adjustable, regulated power source capable of stepping up (boosting) or stepping down (bucking) an input voltage seamlessly. Delivering up to 36V, 5A, and 80W of power , it features a crisp LCD display, hardware reverse-polarity protection, and deep software-driven configuration menus.