Eppendorf 5402 Manual Updated
Never attempt this while the rotor is still spinning. Always look through the viewing window in the lid to ensure complete standstill. 7. Decontamination and Disposal If hazardous material spills inside the chamber: Turn off the machine immediately.
If working with temperature-sensitive samples (such as RNA or proteins), close the lid and press the FAST COOL button. Allow the chamber to reach the target temperature before loading samples.
When handling biohazardous materials, wait at least 10 minutes after the rotor stops before opening the lid to allow any generated aerosols to settle. Troubleshooting and Maintenance eppendorf 5402 manual updated
Avoid third-party PDF repositories. Many host a corrupted or pre-2005 version that lacks critical rotor life warnings.
Refrigerated centrifuges accumulate condensation inside the rotor chamber. Wipe the chamber dry with a soft cloth at the end of each working day. Leave the lid slightly ajar overnight to allow remaining moisture to evaporate. Never attempt this while the rotor is still spinning
Ensures the lid cannot be opened while the rotor is in motion. 2. Updated Operating Procedures
The Eppendorf 5402 manual is an essential resource for anyone using this pipette. By reading and understanding the manual, users can: When handling biohazardous materials, wait at least 10
Standard fixed-angle rotors typically accommodate 18 or 24 microcentrifuge tubes (1.5 mL to 2.0 mL).
| Code | Probable Cause from Community Reports | Suggested Actions | | :--- | :--- | :--- | | | Rotor not recognized or speed measurement system failure. | Check rotor is correctly installed and recognized by the centrifuge. | | Error 1 | Rotor identification failure. | Ensure rotor is properly installed; if issue persists, contact support. | | ERR 02 | Rotor imbalance or over-speed detection. | Ensure rotor is properly seated and loaded with balanced tubes. | | Error 3 | Incorrect speed measurement method. | Check speed sensor and its connections. | | Error A | Temperature sensor failure. | Requires sensor replacement; parts may be limited. |
Ultimate Guide to the Eppendorf Centrifuge 5402: Operation, Maintenance, and Troubleshooting