Thyssenkrupp Levant Stair Lift Installation Manual Top __link__ -

A "top" installation manual dictates rigorous testing before final sign-off.

Wire the power supply from your wall outlet directly to the rail's charging strips.

: Drive the lift slowly to the top and bottom ends. The chassis should stop automatically when it hits the final limit switches before compressing the mechanical buffers. Final Commissioning and Maintenance Checklist

Secure the main load-bearing post to the top of the carriage. thyssenkrupp levant stair lift installation manual top

Typical installation for a straight staircase takes a few hours once the rail has been custom‑measured and pre‑cut.

The installation procedure consists of the following steps:

The Levant uses a slim aluminum rail designed to fit staircases as narrow as 740mm. Installing a Stair Lift in your home, part 1. A "top" installation manual dictates rigorous testing before

Ensure the charger is connected to the rail and plugged into the electrical outlet. Final Electrical Check: Check for any exposed wires. 6. Final Adjustments and Safety Testing (Crucial Steps)

| Carton # | Contents | Handling Note | | :--- | :--- | :--- | | | Pre-cut extruded aluminum rail, rack gear strip, joint connector kit. | Do not bend; store flat on edge. | | B (Gray) | Motor carriage, folding seat, armrests, footrest, swivel lock mechanism. | Lift with two persons (net weight: 58 lbs / 26 kg). | | C (White) | Power supply, remote controls (x2), charger cord, limit switch magnets, hardware kit. | Keep magnets away from pacemakers. |

To keep the ThyssenKrupp Levant running smoothly, perform these tasks every six months: The chassis should stop automatically when it hits

Confirm the stairs can support the weight of the rail and the user. Step 1: Rail Preparation and Assembly

: Fasten the mechanical final limit switches and physical end stops at both ends of the rail immediately to prevent the carriage from driving off the track. 4. Mounting the Seat Assembly

Clean debris out of the rail track; inspect bracket connections.