Orbitor Prospector 100 Metal Detector Manual Link

Low-pitched, broken, or inconsistent sounds indicate iron or trash.

Usually indicates a solid object like a coin or ring.

If the machine emits constant erratic signals or the volume is low, check your 9V batteries immediately.

This product contains electronic components. Do not dispose in household waste. Recycle at designated WEEE collection points. Orbitor Prospector 100 Metal Detector Manual

When a target sounds, sweep the coil back and forth in a tight X pattern.

Proper calibration minimizes false signals caused by ground mineralization or electrical interference. Air Testing (Indoor Setup)

Search YouTube for:

Is your detector experiencing a right now?

Eliminates foil and aluminum pull-tabs, but may also filter out small gold rings.

Pass a coin (like a quarter) across the bottom of the search coil. You should hear a sharp, repeatable beep, and the meter needle should jump. 5. Field Techniques for Successful Hunting Low-pitched, broken, or inconsistent sounds indicate iron or

: Press and hold the power button; the LCD will briefly light up all segments to confirm it is operational.

: Equipped with a VU meter or LED display that indicates signal strength and helps identify the type of metal (iron vs. precious metals).

Connect the lower stem to the search coil, then slide it into the middle/upper stem. Tighten the locking collars once adjusted to a comfortable height. This product contains electronic components