Phison Mpall V3.70.0e ((install)) Jun 2026

Select the correct .bin file from the Firmware folder that matches your controller.

Unlike consumer formatting tools, MPALL communicates directly with the controller chip's bootloader. This unlocks deep technical capabilities: Low-Level Formatting

: Choose your exact chip model from the dropdown (e.g., PS2251-07 ). FC1 - FC2 : Set this to 0xFF-01 for standard builds. Phison Mpall V3.70.0e

The basic process for using MPALL v3.70.0e is as follows, based on community guides.

This is the most critical step, as incorrect settings can damage the USB drive. Select the correct

Click the button on the right side of the interface. Your USB drive should appear in one of the 16 grid boxes highlighted in white or green. Phase B: Configuring the MPParamEDIT

: Can change how your drive identifies itself, such as converting a standard drive into a dual-volume drive or even a bootable CD-ROM emulator (Mode 21). How to Use MPALL V3.70.0E FC1 - FC2 : Set this to 0xFF-01 for standard builds

The drive shows a capacity of 0 bytes or an incorrect capacity (e.g., a 16GB drive shows as 1MB).