Yes. The ViewTV AT-163 supports broadcast resolutions up to 1080i and can output at up to 1080p. Shows recorded to an external USB drive will be stored in their original broadcast quality.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Write this information down. If your version ends with a low number or an old date (e.g., 2020 or earlier), you likely need an update.
This firmware update for the digital TV converter box enhances system stability, improves channel scanning performance, and addresses minor bugs reported in previous versions. It is recommended for all users to ensure optimal device functionality. viewtv at-163 firmware update
If you have obtained the update file (usually ending in .bin ), follow these steps to install it: Preparation
ViewTV manufactured different hardware revisions of the AT-163 over its production lifecycle.
Ultimate Guide to the ViewTV AT-163 Firmware Update Updating the firmware on your ViewTV AT-163 digital converter box can resolve channels dropping, fix software bugs, and improve overall device stability. Because this device does not connect to the internet, you must perform the update manually using a USB flash drive. ⚠️ Critical Warning Before You Begin This public link is valid for 7 days
You must ensure you have the specific firmware for the AT-163 model. Using the wrong firmware can "brick" (break) your device.
Select or Maincode if prompted for the upgrade type.
Before beginning the update process, it is essential to prepare your device to prevent any issues during the installation. Can’t copy the link right now
Double-check that the firmware file is extracted from its ZIP archive. Verify the file sits in the main root directory of the drive and has not been renamed. Device is Brick/Stuck on Boot Loop
The AT-163 does not support automatic over-the-air (internet) updates. You must perform a manual USB update .