A critical cause, as highlighted by field technicians, is performing a "Memory Clear" (SP5-801) on a device originally equipped with a Smart Operation Panel. This procedure resets the machine to its factory-default state. If the factory defaults are configured for a standard panel, the procedure will deactivate the SP5-748-201 setting, leading directly to an SC673-10 on the next reboot.
: If the error persists after a restart, a technician may need to clear the SC code in Service Program (SP) mode: Enter SP mode (typically Reset + 107 + Clear/Stop Navigate to System SP > 5810 (SC Reset) and execute the reset, then restart the machine. Hardware Check : If firmware does not resolve the issue, inspect the USB or communication cables sc673-10 ricoh error
Insert the media into the designated service slot on the controller board or side of the panel. A critical cause, as highlighted by field technicians,
Follow these troubleshooting procedures in order, moving from the simplest non-invasive fixes to advanced hardware checks. Step 1: Execute a Hard Power Reset : If the error persists after a restart,
: The main board may have failed to initialize communication.
 |
Mua hàng Online |
| 098.777.1527 | |
