Ezviz Downgrade Firmware Jun 2026

Power off your EZVIZ camera completely by unplugging its power cable. Insert the MicroSD card into the camera.

Browse your computer's local files to select the older firmware version you downloaded. Click . The software will push the software file over your local network to the camera. Wait for the status bar to hit 100% and allow the camera to reboot completely. Crucial Post-Downgrade Steps

If the firmware is in a ZIP file, extract it to a convenient location on your computer (e.g., your desktop). Phase 2: Using EZVIZ Studio to Downgrade

If the camera loops after a downgrade, try a Hard Reset by holding the physical reset button for 15 seconds. 🛑 Post-Downgrade: Disabling Auto-Updates

Plug the camera into a reliable power outlet. Do not use an unstable power strip or a loose cable.

Improperly flashing firmware can permanently brick your security camera. Ensure you have the following items ready:

Rolling back to older software means you may expose your camera to older security bugs that were patched in newer versions. Keep your camera on an isolated IoT network if possible. What You Will Need To perform the downgrade, gather the following items:

Insert your MicroSD card into your computer. Format the card to . A quick format is usually sufficient, but ensure no other files remain on the card. Step 2: Prepare the Firmware File

This makes any downgrade an . The primary dangers include:

Post-update issues are widespread. Reports include:

The Ultimate Guide to Downgrading EZVIZ Firmware: Step-by-Step Recovery

once firmware is updated. However, users often seek to downgrade firmware (especially for models like the ) to restore ONVIF support or compatibility with third-party

After changing firmware versions, perform a clean factory reset through the mobile app or via the physical button to clear out any conflicting cache or residual settings from the previous software version. Troubleshooting Common Errors The Camera Ignores the MicroSD Card File

Before we go any further, it's critical to understand the official stance from EZVIZ. The company is quite explicit about this point. On their official support pages, you will find a clear statement:

Updates occasionally disable local RTSP (Real-Time Streaming Protocol) streams or ONVIF support, breaking connections to third-party Network Video Recorders (NVRs) or smart home platforms.

If the downgrading process is interrupted (e.g., power loss), the camera may become permanently damaged ("bricked") and inoperable.

The process takes anywhere from 3 to 10 minutes.