: Short-press to execute a global power toggle across all active sub-channels.
The light and remote may have unlinked, or the wall switch is turned off.
The pairing process (sometimes called linking) must be completed before the remote can control any light fixture. Follow these universal steps to link your remote: Step 1: Prepare the Fixture
Do not expose the remote controller to direct moisture, water, or high-humidity environments. smart light remote controller zh17 manual
If your remote is not responding, you may need to pair (link) it to the receiver.
: Turn off the main power switch to the light you want to pair for at least 10 seconds. Power On : Turn the light back on.
Unplug the receiver connected to the light strip for at least 10 seconds. Reconnect Power: Plug the receiver back into power. : Short-press to execute a global power toggle
To control several bulbs together with one ZH17 remote:
: The connected lights should flash (usually 3 times) to indicate that pairing was successful. Key Features & Functions
Turn off the light fixture via the wall switch for 10 seconds. Turn the wall switch back on. Follow these universal steps to link your remote:
Most ZH17 controllers are paired with their receivers at the factory, but if your remote isn't responding, follow these pairing steps:
Within of power restoration, press and hold the Master ON button (or the specific Zone button it was assigned to) 5 times rapidly.
Whether you are reading a book or watching a movie, adjusting brightness is effortless. Use the button to increase light intensity and the Brightness Down button to lower it. Holding down these buttons typically provides a smooth dimming curve. 2. Adjusting Color Temperature
: Automatically cycles through all dynamic patterns. Setup & Pairing Instructions
: Dedicated ON/STANDBY buttons to toggle the lights or enter a low-power mode.