: Note that some versions of the installer may use a Chinese interface; typically, selecting the middle or "Next" equivalent buttons will proceed with the installation. How to Flash Firmware
Click and select your pre-downloaded .bin firmware file (e.g., MKS_DLC32_2.0.x ). Select your verified COM port.
He connected the USB-C cable. The software chimed, a green "Connected" status glowing in the corner of the UI. He loaded a test file—a simple geometric wolf head—and adjusted the focal length of the lens.
: Preview and modify G-code files, including adding positioning codes before sending them to the engraver. Mks Laser Tool Setup V1.1.2.exe Download WORK
Click or View Raw to save the executable file to your local drive. Step 2: Install the Application
Double-click the downloaded MKS Laser Tool Setup V1.1.2.exe file.
Before running the tool, ensure you have the CH340 USB-to-Serial driver installed, as this is required for your computer to "see" the engraver's motherboard. : Note that some versions of the installer
If Windows Defender SmartScreen appears, click and then Run Anyway (common for open-source hardware tools).
Follow this sequential process to ensure your Windows operating system configures the program and associated communication drivers properly: Step 1: Install CH340 USB Drivers
Easily upload updated .bin firmware files to your MKS DLC32 board. He connected the USB-C cable
Some versions facilitate modifying the display interface and configuration files for supported boards. Downloading the Software
How to use the MKS Laser Tool if it you can't click on the buttons.
Whether you intend to use the machine via
To help tailor this setup to your specific workshop, let me know: