Over time, heating elements degrade, causing a discrepancy between the dial readings and actual temperatures. You can recalibrate both tools using a dedicated thermometer (like a Hakko 191 or thermocouple). Calibrating the Soldering Iron
Regular maintenance is essential to ensure the Gordak 952 continues to operate efficiently. The user manual provides guidance on:
If you need to change any parts, look for and A1130 style heating elements , which are widely available online. Always unplug the unit from the wall outlet before opening the casing or replacing parts.
Controls pump speed, regulating the volume of airflow from 0.3 to 24 liters per minute.
Allow 30–60 seconds for the air temperature to stabilize.
Before plugging in or turning on the Gordak 952 for the first time, you must remove the pump transit screw. 1. Removing the Shipping Screw gordak 952 user manual updated
If the iron fails to heat or triggers an unstable LED pattern, the 24V A1321 ceramic element may need replacement.
I can guide you step-by-step through checking the internal components or replacing a heating element. Share public link
feature intelligent PID temperature control, dual LED digital displays, and microcomputer-driven safety functions. Hot Air Gun Soldering Iron Power Consumption 270W – 650W 50W – 60W Temperature Range 100°C – 500°C 200°C – 480°C Airflow Capacity 0.3 – 120 L/min (Max) Pump Type Diaphragm Pump 2. Setup and Controls
Before diving into the user manual, let's take a look at some of the key features that make the Gordak 952 a standout device:
Complete Gordak 952 User Manual: Setup, Calibration, and Troubleshooting (Updated) Over time, heating elements degrade, causing a discrepancy
Place the air gun back in the cradle. The station will continue pushing air, letting the heater cool down automatically before powering down. B. Soldering Station Power On: Toggle the Soldering button. Temperature Set: Turn the soldering TEMP knob.
Controls the fan speed/velocity of the diaphragm pump.
The Gordak 952 is a staple dual-function rework station found on electronics benches worldwide. Combining a temperature-controlled soldering iron and a hot air rework gun, this analog-controlled workstation is designed for surface-mount device (SMD) soldering, desoldering, and circuit board repair.
, follow these critical safety guidelines provided in the Gordak 952 User Manual :
Adjusts the fan/pump speed to regulate airflow volume. The user manual provides guidance on: If you
Desolder the four leads of the old element from the small PCB board. (Two heater leads, two thermocouple leads).
Dampen the cleaning sponge with water (it should be moist, not dripping).
The first step in using any updated manual is correctly identifying which model you own. "Gordak 952" is actually a series that has evolved over time, with each version having slightly different features. Understanding your specific model is the key to unlocking the right instructions. Here are the most common variants:
150°C to 500°C (302°F to 932°F) Air Pump Type: Diaphragm Pump Airflow Capacity: 0.3 to 24 Liters per minute (L/min) Soldering Iron Power: 50 Watts