16+
The SDC20 is designed to be mounted on a panel or in a control cabinet.
: Thermocouples (K, J, T, E, R, S, B), RTDs (Pt100), and DC voltage/current. yamatake sdc20 user manual
Many users buy the SDC20 for its programming capabilities, but fail to set the . The manual provides a step-by-step: The SDC20 is designed to be mounted on
Internal memory corruption. Power cycle the unit. If the error persists, the controller requires repair or replacement. : Instructions for RS-485 or RS-232C communication (CPL
: Instructions for RS-485 or RS-232C communication (CPL protocol) used when integrating with host stations or PLCs. Key Technical Specifications Power Supply 85 to 264 Vac (50/60 Hz) Power Consumption 18 VA maximum Input Types Thermocouples and RTDs Weight Approximately 0.71 lbs Safety Standard Category II (IEC664-1) Where to Find the Manual
Press and hold PARA for 3 seconds to return to the basic display. 5. Communication and Software
You can access official and archived versions of the documentation here:
