Program Epson 1390 Resetter Fixed _best_: Adjustment

The program will display a message: "Please turn off the printer." Turn off your Epson 1390 using its physical power button. Click on the software prompt. Turn the printer back on.

A: Because the program modifies Epson drivers, it is flagged as potentially dangerous. You must temporarily disable your antivirus before extraction and use.

Do you plan on to handle the physical ink? Share public link

Fixing the resetter typically involves several technical steps. One reliable method is to reinstall the adjustment program in compatibility mode (Windows 7 or XP Service Pack 3) and run it as an administrator. Another fix involves manually editing the program’s configuration files or using a separate “resetter” utility that communicates directly with the printer’s EEPROM via a USB command sequence. Advanced users may use a dedicated EEPROM reset tool or even solder a replacement EEPROM chip. In many online forums, the “fixed” solution refers to patching a specific version (e.g., v1.3.0 or v2.0.0) of the adjustment program to bypass incorrect region checks or CRC errors. Once fixed, the program successfully communicates with the printer, resets the waste ink counter to zero, and clears the error state.

For the Epson Stylus Photo 1390, this limit is reached after printing approximately , or about 5 years of typical usage —whichever comes first.

If you encounter errors while trying to execute the reset, try these quick fixes:

A pop-up prompt will ask for confirmation to reset the counter. Click . Step 5: Finalize the Hardware Reset

Epson designs its printers with internal porous pads to absorb excess ink during head cleanings and printing. To prevent ink from leaking out of the machine and onto your desk, the printer uses a digital counter called the .

Finding your Epson 1390 stuck with blinking red lights is a classic "service required" headache. Usually, this means the internal waste ink pads are "full" according to the printer’s counter, even if the hardware is fine.

Resetting only fixes the software lock; users are strongly advised to physically clean or replace the waste ink pads or install an external waste ink tank to avoid physical damage to the printer or workspace. Critical Usage Requirements

The alternating red flashing lights should now be gone, replaced by a solid green power light. Your Epson 1390 is officially fixed and ready to print again. Critical Next Steps: Physical Maintenance

You may have downloaded a trial version. You must find a "fixed" version ( AdjProg.exe that bypasses key activation).