Enhanced algorithms can accurately read lower Equivalent Series Resistance (ESR) values on capacitors.
A firmware update usually consists of two files: a .hex file (the program) and an .eep file (the EEPROM data). Load the .hex file into your flashing tool. lcr t7 firmware
The King of Custom Firmware: Karl-Heinz Kübbeler’s TransistorTester set the action to Read
For those comfortable with C, the m-firmware source is highly modular. You can: specify a file name like stock_eeprom.eep
Custom firmware often includes better calibration algorithms for low-resistance and low-capacitance measurements.
In the section, set the action to Read , specify a file name like stock_eeprom.eep , and click Go. Step 3: Clear the Chip and Program New Fuses
avrdude -c usbasp -p m328p -U lfuse:w:0xe2:m -U hfuse:w:0xd9:m -U efuse:w:0xff:m