Amada Pega 357 User Manual Link Today

1270 mm x 1830 mm (50” x 72”)

Use polyurethane slug ejectors on the punch tips, apply proper tool lubrication, or switch to specialized "slug-hugger" dies. 6. G-Code Programming Fundamentals for Pega 357

For more detailed information on the Amada Pega 357, consult the following user manual resources:

The machine is versatile and is rated for punching materials such as steel, aluminum, and copper. amada pega 357 user manual

Program stop (allows the operator to clear slugs or check parts). M02 / M30: End of program execution. M32: Workchute open (for small parts drop). M33: Workchute close. M80 / M81: Auto-index tool rotation commands. 6. Troubleshooting Common Alarm Codes

The Amada Pega 357 is a powerful and versatile turret punch press that requires a thorough understanding of its operation, maintenance, and troubleshooting procedures to ensure optimal performance. By following the guidelines outlined in this article and consulting the official user manual, you'll be able to unlock the full potential of your Amada Pega 357 and achieve exceptional results in your metalworking applications.

Inspect the tension of the main drive belts running from the motor to the flywheel. Troubleshooting Common Errors 1270 mm x 1830 mm (50” x 72”)

Consistent maintenance prevents costly downtime. The user manual divides maintenance into three schedules: Daily Maintenance

The documentation is traditionally split into three separate volumes:

Remove all foreign objects, wrenches, or leftover materials from the brush or ball tables. Material Loading and Clamping Program stop (allows the operator to clear slugs

5.5 KW main motor; requires 80 PSI (approx. 5–7 bar) air supply. Maszyneria 116410-PEGA-357 (04P-C) Parts List (Feb-1989 Ref. 16126)

If you’d like, I can:

Ensure the incoming compressed air line meets the required 75 to 85 PSI (5.0 to 6.0 kg/cm²) . Low air pressure can cause clutch slippage and brake failure. 3. Understanding the Control Panel and Programming

The gap between the punch and die is too wide for the chosen sheet gauge. Symptom: Axis Positioning Error (Overtravel)