Check the sticker on the back or bottom of your printer. Ensure it matches ML-2160, ML-2165, ML-2160W, or ML-2165W.
The printer insisted it was "out of toner," even though Alex had just refilled the cartridge by hand. The problem wasn't the powder; it was the on the cartridge, a tiny digital watchdog that told the printer the toner was dead, even if it was full.
If your wireless model cannot connect to the network or you are moving it to a new environment, you can reset the network card to factory defaults. Using the WPS Button
If you are not trying to bypass a chip error but simply want to reset the printer to its factory network or configuration state: firmware reset samsung ml 2160 2165 2160w 2165w
Modifying device firmware carries inherent risks. If done incorrectly, you can "brick" your printer, rendering it permanently unusable. Follow these preparation steps closely:
If a previous firmware update failed, the printer may be "bricked" (unresponsive). For the ML-2160 series, the advanced recovery method involves using a connected directly to the printer's mainboard.
Watch the printer鈥檚 LED lights. They will change colors and blink rapidly as the internal flash memory is overwritten. This process takes 1 to 3 minutes. Check the sticker on the back or bottom of your printer
Click and hold the .hd firmware file, drag it directly over the top of the usbprns2.exe icon, and release it.
Fix firmware for Samsung printers is generally created using a generator tool that binds the software to your specific or Serial Number .
The Samsung ML-2160 series uses a smart chip on the toner cartridge that counts the number of pages printed. Once it reaches its programmed limit, it signals the printer to stop, even if the cartridge still contains toner. The firmware fix is designed to make the printer ignore this signal. The problem wasn't the powder; it was the
Resolving unresponsive states, continuous blinking error lights, or false hardware alerts.
Locate the two primary files: the modified firmware file (e.g., FIX_ML2160_V1.01.01.12.hd ) and the uploader executable ( usbprns2.exe ).
ML-2160 / ML-2165 (non-W):
While continuing to hold that button, press and hold the button.