Cat4500e-universalk9.spa.03.11.05.e.152-7.e5.bin

cat4500e-universalk9.spa.03.11.05.e.152-7.e5.bin is a software image for the Cisco Catalyst 4500E series switches. It belongs to the Cisco IOS XE 3.11.5E release (internally known as Cisco IOS 15.2(7)E5). Image Overview

OSPF v2/v3 (limited), EIGRP stub, RIP, Policy-Based Routing (PBR), VRF-Lite. Core / Full Distribution Layer

Verify the file is present on the supervisor using dir bootflash: . Then, set the boot variable and write to memory: cat4500e-universalk9.spa.03.11.05.e.152-7.e5.bin

: This image is validated for Catalyst 4500E Supervisor Engines, including the Sup8-E (with Cisco StackWise Virtual support) and Sup7-E/7L-E. 3. Compatibility and Supported Hardware

: Download the .bin file from Cisco's official website and place it on a TFTP server accessible from the switch. cat4500e-universalk9

– A 4507R+E running 12.2(53)SG needs to support new line cards like the WS-X4748-RJ45V+. This image provides hardware compatibility while retaining the classic IOS CLI.

Based on the filename and associated release notes, here is the detailed breakdown: cat4500e : Designed for Catalyst 4500E series switches. Core / Full Distribution Layer Verify the file

Because this image file uses a universalk9 packaging scheme, the exact features available to a network architect depend entirely on the active software licenses installed on the switch chassis: License Tier Target Use Case Core Capabilities Supported Layer 2 Access

boot system flash bootflash:cat4500e-universalk9.spa.03.11.05.e.152-7.e5.bin Verify Boot Settings show bootvar