Identify the correct (check Device Manager for the CH340 driver) and set the baud rate—typically 250,000 or 115,200 depending on your specific board model. Select your firmware .bin file and click Start to flash. WiFi Configuration : Enter the WiFi Configuration tool within the app.
The software is often provided by the laser machine manufacturer. The exact filename can be something like MKSLaserTool_setup V1.1.2.exe or MKSLasertool_setupV1.0.6.zip for version 1.0.6, with the "v112exe" in the keyword likely pointing to version 1.1.2. The latest widely available version is V1.1.2. To get the correct version, it's best to check the official website of your laser machine's brand (e.g., Longer, TwoTrees), the manufacturer's support page, or consult the documentation that came with your machine.
Open MKS Laser Tool V1.1.2.exe . You do not typically need to "install" it in the traditional sense; it often runs as a standalone executable. Step 3: Making it "Work Work" (Configuration) mks laser tool setup v112exe download work work
Users want not just the file but .
firmware file for your motherboard (e.g., ESP32 S3 for Two Trees TTS Pro). Set the baud rate (usually ) and click "Start". www.longer3d.com Why the "Work Work" Isn't Happening Identify the correct (check Device Manager for the
Fix: Lower the Baud Rate setting to 115200 to make the connection more stable. On some hardware revisions, you may need to hold down the physical "Boot" button on the motherboard while clicking start.
Upon launching the MKS Laser Tool, you will be presented with the main dashboard. The most important tools you'll use are: The software is often provided by the laser
The v112exe is 32-bit. On Windows 11 64-bit:
: The most reliable way to obtain the tool and the corresponding firmware is from the Makerbase GitHub Repository.
For ESP32-based boards like the DLC32, use the software to input your local WiFi SSID and password. This enables wireless file transfer and mobile app control. To help troubleshoot your specific setup, please share:
You can typically find the official MKSLasertool_setupV1.1.2.exe on the Makerbase GitHub Repository . Some manufacturers also provide it via cloud links or on the TF card included with your machine. 2. Installation Guide