Setup V7.17 | Black Copper Pos P80 Driver
If you aren't sure about the port or IP address, perform a self-test: the printer. Press and hold the FEED button. Turn on the printer while holding the button.
Click Finish to exit the wizard. The driver configuration interface should launch automatically. 3. Driver Configuration
In the window, return to the General tab.
Physical preparation prevents communication errors during software setup. black copper pos p80 driver setup v7.17
Incorrect driver model chosen or mismatched baud rate over serial connections.
is a straightforward process that ensures your thermal receipt printer communicates perfectly with your Point of Sale system. This comprehensive guide walks you through the step-by-step installation, configuration, and troubleshooting methods for this specific driver version. Driver Overview The Black Copper POS P80 Go to product viewer dialog for this item.
Choose your current Windows Operating System from the OS selection list if it is not automatically detected. If you aren't sure about the port or
The Black Copper BC-P80 is a widely used 80mm thermal receipt printer valued for its speed and reliability in retail and hospitality environments. To ensure seamless communication between your Point of Sale (POS) software and the printer, installing the correct driver version is essential.
: Ensure the printer is powered on, loaded with 80mm thermal paper, and connected to your computer via USB. Driver Download
Check the readme_pos717.txt or visit the POS thread on ECF (E-Cigarette Forum) – Black Copper P80 edition. Click Finish to exit the wizard
Re-open Printer Properties > Ports . Switch the checkmark to a different USB port designation (e.g., move from USB001 to USB002 ), click Apply, and test again. Also, verify that "POS-80" was selected during the driver wizard setup rather than "POS-58".
: Ensure an 80mm thermal roll is loaded correctly.
Connect the power adapter to the Black Copper P80 printer and plug it into an electrical outlet. Turn the power switch ON.