At least 1500 mm of clear space without obstacles.

The unit uses R-32, which is mildly flammable. Ensure the installation area is ventilated and away from ignition sources.

Never release refrigerant into the atmosphere. The system must undergo rigorous pressure testing and vacuum dehydration before releasing the factory charge. Pressure Testing (Leak Detection)

Open the liquid and gas service valves on the outdoor unit completely using a hex wrench. Reinstall and tighten the valve caps.

Place the unit on a flat concrete pad. Use rubber vibration-absorption pads under the mounting feet.

Never use air or the system's own refrigerant to purge the lines.

Always weigh in the additional R32 refrigerant in its liquid state using a digital scale. 8. Final Commissioning and Test Run

Proper installation is critical to ensure efficiency, longevity, and safety. This guide outlines the essential steps and safety protocols found in the official . ⚠️ Safety Precautions & Requirements

Ensure a proper earthing connection is established to prevent electric shock. Климамаркет Phase 4: Commissioning Air conditioner - Installation manual

: Use rubber legs and a proper grommet to reduce noise and residual vibration transferred to the building structure. KLIMAVEX GROUP Key Technical Specifications System Type Multi-Split Outdoor Unit (FJM) 6.8 kW Cooling / 8.0 kW Heating Max Indoor Units Connects up to 3 units Refrigerant R32 (2.0 kg pre-charged) 6.35 mm (Liquid) / 9.52 mm (Gas) Max Total Pipe Length 50 m (Total) / 25 m (per circuit) Max Elevation Electrical 20A Fuse Rating, Single Phase Installation Steps The standard procedure for this model includes: Air conditioner - Installation manual

The is a high-efficiency multi-split outdoor unit (FJM) designed to connect up to three indoor units . Proper installation is critical to maintain its 7.8 SEER rating and ensure the longevity of its R32 refrigerant system.

At least 600 mm for maintenance and wiring access.