Api 610 12th Edition Data Sheet Excel Jun 2026

: Flow rates, pressures, and temperatures for all specified points. Liquid Properties : Specific gravity, viscosity, and vapor pressure. Materials of Construction

Mounting type (centerline supported for high temperatures), nozzle ratings (ANSI/ASME flanges), and maximum allowable working pressure (MAWP).

Eliminate manual calculations by hardcoding standard fluid dynamic equations.

Closer alignment with API 682 4th Edition requires more granular fields for seal flushing plans (e.g., Plan 11, 52, 53A) and buffer/barrier fluid characteristics. 3. Core Sections of an Excel API 610 Data Sheet Api 610 12th Edition Data Sheet Excel

| Class | Application | Common Mistake | |-------|-------------|----------------| | S-1 | Low pressure, non-corrosive | Used for sour service → fails | | C-6 | Moderate corrosive (e.g., crude) | Incompatible with chlorides | | D-1 / D-2 | High temp / corrosive (chrome steel) | Wrong heat treatment specified | | A-7 / A-8 | Duplex / super duplex (seawater, CO2) | No NACE MR0175 check |

The pump might be made of stainless steel or duplex, but the foundation of a successful project is stainless data. Do not rely on memory or loose paper notes. Download the latest API 610 12th edition datasheet template today, and ensure your centrifugal pumps run reliably for the next 20 years.

An Excel-based API 610 12th Edition data sheet is the industry standard for managing this data. It provides the flexibility required for complex engineering calculations while maintaining the rigid structure demanded by the American Petroleum Institute. 1. What is the API 610 12th Edition Data Sheet? : Flow rates, pressures, and temperatures for all

+--------------------------------------------------------+ | 1. General Info & Operating Site Conditions | | (Project Name, Fluid Properties, Ambient Temp) | +--------------------------------------------------------+ | 2. Performance & Hydraulic Requirements | | (Flow Rate, Rated Head, NPSHa, Efficiency) | +--------------------------------------------------------+ | 3. Mechanical & Construction Details | | (Pump Type, Casing, Impeller, Nozzle Loads) | +--------------------------------------------------------+ | 4. Materials of Construction | | (API Material Class, Casing, Shaft, Wear Rings) | +--------------------------------------------------------+ | 5. Auxiliary Systems & Testing Requirements | | (Seal Plans, Driver Specs, Hydrostatic/NPSH Tests) | +--------------------------------------------------------+ 1. General Info & Operating Conditions

This article provides a deep dive into why the Excel-based datasheet format is essential, what has changed in the 12th edition, how to structure your spreadsheet, and best practices for using these digital forms to avoid costly pump failures.

API material code selection (e.g., I-1, S-1, S-8, D-1) for pressure casings, impellers, shafts, and wear rings. Section 5: Bearings, Lubrication, and Seals Core Sections of an Excel API 610 Data

API 610 12th Edition (released January 2021) introduced a revised, official Excel-based data sheet template

Highlight the NPSHa cell in Red if it is less than