Samyung Srg-1150dn Installation Manual [repack] Today

Reseat the connection lines running between the terminal and the DPU-414.

Are you connecting a specific for position tracking?

Maintain a safe distance from magnetic compasses: Standard Compass ; Steering Compass 1.5m . Environmental Conditions : Operating temperature: -15∘Cnegative 15 raised to the composed with power C +55∘Cpositive 55 raised to the composed with power C . Relative humidity: 95% at +55∘Cpositive 55 raised to the composed with power C Initial Setup Steps

Once all hardware is mounted and wired, complete the initial setup. Power-On Checklist Verify the supply voltage is between 21.6V and 31.2V DC. samyung srg-1150dn installation manual

: Tie this module into the multi-pin aux alarm socket to distribute auditory warning tones to alternative duty stations across the vessel. System Initialization and MMSI Integration

The SRG-1150DN is designed for a power supply.

: Ensure the LCD screen is visible under all lighting conditions, avoiding direct glare. Reseat the connection lines running between the terminal

: On fiberglass (FRP) or wooden vessels, weld or bolt the straps to an external underwater grounding plate with a surface area of at least 4. RF and Antenna System Integration

Adjust the viewing angle of the LCD screen before tightening the knobs completely. 3.3 Power Supply Connection The SRG-1150DN operates on a 24V DC system (24VDC ± 15%). Connect the Red wire to the positive (+) terminal. Connect the Black wire to the negative (-) terminal.

Confirm both AC mains and auxiliary DC switches are toggled to the position. : Tie this module into the multi-pin aux

Once the printer driver is installed, configure the printer settings:

Mount all components at least 1.5 meters away from magnetic steering compasses to avoid interference. 2. Mounting the Hardware Main Transceiver and Control Unit