Huawei Usb Com 1.0 Driver.zip Verified

Compatible with older and modern Kirin processors, including Kirin 659, 710, 960, 970, 980, and Kirin 990.

When a Huawei modem is functioning normally, Windows recognizes it as a NDIS (Network Device Interface Specification) or a standard modem on a high-numbered COM port. But when the modem’s firmware is corrupted, or a flash process fails, the device enters a failsafe mode. In this state, the modem identifies itself to Windows as "Huawei USB COM 1.0" – a bare-bones serial interface. Without this specific driver, the PC cannot see the device, rendering firmware recovery tools useless.

In Device Manager, right-click the item, select Update Driver -> Let me pick... , and manually force the list to read from the extracted Huawei folder rather than allowing Windows to choose automatically. Conclusion huawei usb com 1.0 driver.zip

Supports both 32-bit (x86) and 64-bit (x64) architectures of Windows 7, Windows 8, Windows 10, and Windows 11. Download Huawei USB COM 1.0 Driver.zip

Hold down the while clicking Restart in your Windows Start Menu. Compatible with older and modern Kirin processors, including

Restart your computer once the installation wizard finishes.

Restart your PC to ensure the driver installation is fully integrated into the Windows system. In this state, the modem identifies itself to

Try a different USB cable, use a USB 2.0 port instead of USB 3.0, or re-apply tweezers to the testpoint. Next Steps: Repairing the Device